Cummins InPower Pro 14 (installation files)
1 pièce(s) jointe(s)
Cummins InPower Pro 14
InPower provides the following functions for monitored equipment: • Direct connection capability from a personal computer to PowerCommand genset controls, transfer controls, and system controls; For details on devices supported refer Technical Details tab. • Allows the monitored equipment to send alarm information to a connected computer. • Configurable for units of measurement, and level of user access (read only, read/change values, administrator). • Adjustment of nearly every adjustment parameter within the connected control system, including parameters such as voltage and frequency levels, gains, protection set-points and other values. • Convenient programming of configurable inputs in the controllers. • Viewing of equipment history, fault codes, and data associated with fault codes. • Generates reports of monitored data • Allows released firmware upgrades on Power Command genset controls. • Plot critical parameters in a strip chart format, and export data to 3rd party software tools for manipulation and viewing. • Simulate fault conditions in genset controls in compliance to NFPA 110 requirements to demonstrate functionality of the controller and monitoring equipment in a facility. https://i120.fastpic.org/big/2022/08...aa8a8898eb.png |
1 pièce(s) jointe(s)
The link was updated
|
1 pièce(s) jointe(s)
Cummins InPower Pro 14
InPower provides the following functions for monitored equipment: • Direct connection capability from a personal computer to PowerCommand genset controls, transfer controls, and system controls; • Allows the monitored equipment to send alarm information to a connected computer. • Configurable for units of measurement, and level of user access (read only, read/change values, administrator). • Adjustment of nearly every adjustment parameter within the connected control system, including parameters such as voltage and frequency levels, gains, protection set-points and other values. • Convenient programming of configurable inputs in the controllers. • Viewing of equipment history, fault codes, and data associated with fault codes. • Generates reports of monitored data • Allows released firmware upgrades on Power Command genset controls. • Plot critical parameters in a strip chart format, and export data to 3rd party software tools for manipulation and viewing. • Simulate fault conditions in genset controls in compliance to NFPA 110 requirements to demonstrate functionality of the controller and monitoring equipment in a facility. https://i120.fastpic.org/big/2022/08...aa8a8898eb.png Need it? Push buttons Rate (Reputation) and Thanks, PM for pass. |
Hi my friend,
Many thanks for your soft, but i think 90 percent of people on this forum Will not use this Last one. i know some people who works with Cummins motors [emoji6]. If you have same for caterpilar i take[emoji6]. Have a Nice day. Envoyé de mon SM-A125F en utilisant Tapatalk |
The link was updated
|
Cummins InPower Pro 14.5 (installation files)
1 pièce(s) jointe(s)
added Cummins InPower Pro 14.5 (installation files)
|
The link was updated
|
Fuseau horaire GMT +1. Il est actuellement 17h16. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Version française #23 par l'association vBulletin francophone
Tlemcen-electronic © All right reserved