307 BSI need virgin dump
 

Hi,my friend i'm new in this forum,i'm glad to talk with you,i want replace bad bsi in peugeot 307 1,6HDI 2005 I have found used bsi and writed ST95128,with virgin file,but when i start pps insert vin,pin code,and it tell me:bsi can't start program,please help,me.thanks.

maybe you are using bad virgin file.

ok this is my virgin dump

i don't think that's virgin !

Hi again ,i have question for you,maybe you have a virgin dump for my BSI ,i have many software and dumps for exchange ,maybe you need somthing.Regards t77

no, beleive me i don't have for that model,

i check with others virgin dump and it appear like not ok !!!

is just for that i told you that's not ok !

Ok thanks for quickly reply.Now i know thats i must search for good dumps .
Thank You.

Hi !

Sorry but your dump remains not virgin

The details refering to your dump :

VIN : VF33HRHR 9310(x)187
& the PIN refering is : QC(x)T

So, here you are what are you seeking for !
Pass on PM, Best regards:41:!

Thanks of lot Mrpromega for this dump i will be try use it.

Welcome
give us the result, Best regards !

Ok today I was programmed your dump of BSI and car started. This dump really work after configuration....Many thanx Mrpromega for help. U are GREAT.
Best Regards

Welcome again

Best regards ...:coolgleamA:

Hello, I have troubles with engine starting on Peugeot 307 2.0 HDI 66kW 90hp (DW10TD) 2002 year.
It seems that immo blocks engine. Can comebody help me with fixing ecu and bsi dumps?
ECU: siemens 93c56
BSI: 912dg128

See original files in attachment.

Hello write more about what happens with BSI and ECU? Bsi is VALEO? ECU siemens number please.
Regards

Battery was completely discharged (the reason was in generator set belt). I've took power from another auto to start engine. Everything was fine. Then I had a short trip (about 1 km), stopped engine, disconnected and charged battery. Then I connected battery again, but after that immo indicator on panel blinks very often and I can't lock the car, lift windows up and down and start engine. But audio and all lamps work.

I guess ecu is Siemens_SID_801_5WS40030B-T.
I'll clarify ecu and bsi numbers today.

OK may be you need only diagnosis by Lexia/Proxia and make telecoding.Do you have this interface? If not you will problem ,becouse even if you will have a good dumps ,that you must conduct telecoding.Try first diagnosis BSI

I've already diagnosed BSI. There are no keys there. BSI is locked and ECU is blocked too. I need good pair of dumps or my fixed dumps. I think I need synchronized dumps (ecu+bsi) which are suitable to each other. Is there any other way to fix such problem?

Hi


Your BSI remains emptied my friend, have no fear, you've just to set the keys on the BSI with the appropriate Personal Identification Number of the car to left the immobilizer ok, then you've to activate the locking options, windows ... etc

Best Regards !

Sorry for delay. BSI was successfully restored, but the problem is deeper than I've thought. There are some serious errors in motor block flash which I can't delete.

Additional info:
SIEMENS SID 801
5WS40030B-T
/05653/226454082/02280

Firmware version SW9646449280
Flash version HW9644302380

Can somebody help me with error cleaning? Current firmware is in attachment.

Hi

To remove the doubt that the immobilizer prevents your car to start, why not squarely remove the immo from ur ECU "Immooff" and try here to start the engine, after you see other problems. & remember to put everything after in order...

this is what you need, it will be in degraded mode: Less than 3000Rn/Min

Best regrads !

Thank you very much! I'll try it and write about the result.

Mrpromega, Thanks for you help. Firmware is suitable, but problem was not solved. After flash reprogramming and trying to start engine PPS shows P0200 Injector Circuit Malfunction error and engine does NOT start. This error can't be cleared via PPS. Can this problem be solved without ECU replacement ?

Hi !!
Now, ur problem seems clearer than it was !!!
U've 1 on these 3 causes :

Injector - Wiring or ECU

Check all of them & the prb'll solv